Steve Platt collects articles and notes on online dating services, professional matchmaking, speed dating events, and relationship advice for a range of locations and demographics.
"If you want a more personal approach to finding matches than online dating provides, consider enlisting the help of a professional matchmaker."
The site covers speed dating events in Stratford-upon-Avon and Warwickshire, New Jersey singles and professional matchmaking with over 25 years of dating experience, the costs of online dating services including eharmony and Badoo, a guide to legitimate cougar dating sites and avoiding scams, an article on Olympic ice skating pairs and figure skating romances, and a guide for expat dating in Baku, Azerbaijan.
Speed Dating in Stratford-upon-Avon
Information on speed dating events in Stratford-upon-Avon and Warwickshire, aimed at single men and women across Herefordshire and the wider region. The page also serves as an introduction agency listing and points to free join options, photos, chat rooms, interest groups, and private webmail.
Locations covered include Stratford-upon-Avon itself as well as nearby towns such as Coventry, with references extending across Warwickshire.
New Jersey Singles & Professional Matchmaking
An overview of professional matchmaking services in New Jersey, highlighting personalized coaching and over 25 years of dating experience. The article describes how a matchmaker works to understand a client's relationship goals, gathers preferences on age range, height range, smoking status, financial security, and personality traits, then brings two people together with continued feedback.
How to fix a projector showing a blue or green tint
A projector showing a blue or green tint can resemble a failed light engine, but the most common causes are usually a colour-format mismatch or saved picture settings. A uniform cast across video, games and streamed content suggests a common device in the signal chain. A tint appearing on only one input is more likely to involve that source, its cable or the receiver input assigned to it. Diagnose the chain before ordering parts or replacing the projector.
Begin with the projector’s own on-screen display, if available, and compare it with the same content from a phone or local media player. The display is generated after most picture processing, so a normal projector menu with tinted video points upstream. If the menu is also blue or green, switch off user picture modes and inspect the projector itself. Record every input and connected device before unplugging anything; that short audit prevents the common mistake of changing several settings at once.
Find where the colour cast begins
First, determine whether the tint appears in the projector's menu or only in the incoming image. A clean on-screen display with blue or green video points towards the source, receiver, distribution box or signal format. If the menu carries the same cast, the problem is more likely to be a global projector setting, an internal colour filter or damaged optical hardware. Disconnect the video cable and check the menu again to confirm this distinction.
Map the signal path from left to right: satellite receiver, streaming device or console; HDMI or component cable; surround-sound receiver or HDMI distributor; and finally the projector. Bypass the receiver or distributor for one test and connect a source directly to the projector. This isolates shared equipment from faults confined to a particular input. Note whether the cast is uniform, appears in shadows, affects only bright areas or changes between HDMI inputs.
If content is displayed through SharePoint Views, repeat the test with a local file. A browser workflow adds account, transcoding and display variables beyond the projector, making it harder to identify the faulty component. The same approach applies to apps and streaming platforms: compare a local test pattern with each service rather than assuming every source has the same colour output.
Match the signal and colour formats
HDMI can carry digital video in several colour formats, including RGB and YCbCr variants. A source, receiver and projector must agree on a format they all support. When one device interprets the chroma information differently from the others, skin tones can look unnatural and the entire picture may acquire a blue, green or purple cast. HDCP negotiation, EDID detection and high dynamic range mapping can also affect what the source sends.
Reset the picture controls on both the source device and projector before making manual adjustments. On an HDMI source, leave the format on automatic where possible; otherwise select a shared RGB or YCbCr option. For component video, use the correct YPbPr input rather than RGB or VGA. High-bandwidth modes such as 4K at 120 Hz, Dolby Vision and HDR10 should only be enabled when the complete chain supports them.
| What you observe | Likely cause | Best first action |
|---|---|---|
| Blue cast on every source and the projector menu | Global picture setting or optical fault | Reset the picture profile, then inspect the projector |
| Green cast on one HDMI input only | Source format, EDID or handshake issue | Connect that source directly to the projector |
| Incorrect colours with dark blocks | Chroma format mismatch | Match RGB, YCbCr or YPbPr settings |
| Green flecks, flicker or intermittent tint | Marginal signal or unstable handshake | Re-seat the cable and test a known-good connection |
| Uneven green patch or coloured area | Dust, panel fault or light-engine problem | Clean the external lens and seek service if it remains |
| Red and blue appear swapped on component video | Incorrect Pb/Pr assignment or cable | Select the proper component input and replace the cable |
An Australian media room might combine a Foxtel satellite receiver, Fetch, an Apple TV, a games console and a surround processor. Configure the source that is actually failing rather than changing every device. For example, a Dolby Vision television may need to output HDR or SDR to a projector that cannot map the newer format correctly. Using a matching mode removes a variable without sacrificing the intended resolution.
Test receivers, cables and converters
Surround-sound receivers often include picture processors, video scalers, lip-sync features and game modes that are not obvious from the front panel. Reset the receiver, disable its picture enhancements and update its firmware. Check whether its output resolution and refresh rate match the projector's capabilities. Some older receivers convert 4K signals to 1080p, while others negotiate an unsupported chroma format or pass an unusual EDID profile to the projector.
A damaged HDMI cable rarely creates a clean, constant blue or green cast because digital video includes error checking. Instead, marginal cables tend to produce flicker, sparkles, intermittent colour blocks, sound dropouts or a failed handshake. They can still be responsible when the source repeatedly reconnects and settles on an incorrect output mode. A concise HDMI cable guide explains the bandwidth and certification differences relevant to 4K projectors.
For component video, a miswired or incorrectly seated Pb/Cr lead can create a persistent colour error even when the picture is otherwise stable. Use a known-good component cable, confirm that the receiver input is assigned to component rather than composite, and check the colour-option setting for that input. Vintage VGA and SCART arrangements are even more sensitive to pin order. Replace improvised cables rather than bending connectors to make them fit.
Converters, splitters and HDMI distributors deserve special attention because inexpensive models may support only 1080p at 60 Hz or limited chroma modes. Remove them from the test chain and connect the source and projector with a direct cable. If the tint disappears, update the converter or choose one that advertises the exact resolution, refresh rate, HDR profile and audio format required by the projector.
Separate picture settings from hardware faults
Return the projector's picture menu to factory defaults before changing individual controls. Check the colour-temperature preset, picture mode, RGB gain and bias, hue, saturation, gamma, black-level adjustment, dynamic contrast and lens-shift settings. A cool colour-temperature preset can create a blue cast, while an unusual green preset can dominate an unsuitable mode. Resetting first reveals whether the menu contains a deliberate correction that no longer suits the source.
If the fault remains with every source and the projector's own menu, consider the internal light path. A worn lamp usually produces lower brightness and a yellowish appearance rather than a strong blue or green cast. DLP projectors can suffer from colour-wheel, DMD or light-engine problems, while LCD models may have ageing polarisers, tinted panels or a failed image section. Dust and insects around the intake can also create uneven colour, particularly in a garage or enclosed media room.
Many Aussie homes place a projector in a brick-veneer media room, study or converted garage, where summer heat and dust are common. Keep vents clear, use the projector's specified filter-cleaning routine and allow the lamp to cool before maintenance. General media-room reading such as Lotus Symphony Blog may help document ideas, but model-specific guidance should take priority when judging a suspected hardware fault.
Follow a controlled reset and correction routine
A controlled power cycle can clear a failed handshake without altering the installation. Turn off the source, receiver and projector, unplug them for several minutes, then reconnect one device at a time. The projector wall switch guide illustrates convenient power isolation, but its wiring must not be copied blindly into an Australian installation. Mains wiring uses 230/240 V, Type I plugs and local circuit-protection rules; use a qualified electrician for fixed wiring.
Apply these checks in order:
- Photograph the current connections and record every resolution, refresh rate and colour-format setting.
- Reset the projector's picture profile, then check its on-screen display with no source connected.
- Match the source and projector to a resolution, refresh rate and colour format supported by both.
- Bypass the receiver, converter or splitter and test with a short, known-good HDMI cable.
- Power-cycle the complete chain, then update projector, receiver and source firmware if a problem persists.
- Stop colour correction if the cast affects the projector menu or appears as a fixed patch, haze or missing colour segment.
Once the image is stable, make only small corrections. Choose the appropriate colour-temperature preset, adjust white balance against neutral grey content and use RGB controls sparingly. Compensating for a hardware fault with heavy blue or green gain merely produces an inaccurate picture. Persistent tints, colour patches, unusual menu colours or a projector that no longer recognises its input should be referred to an authorised service centre, particularly while the unit is still under warranty.
Legitimate Cougar Dating Sites
A guide to finding legitimate cougar dating sites, avoiding scams, and getting good results on platforms such as CougarDate.com, Cougar Life, and Adult FriendFinder. The article lists seven cougar dating sites, examines whether CougarDate.com is a scam, and includes a separate list of free dating and hookup sites.
Olympic Ice Skating Pairs and Romances
An article discussing prominent figure skating romances, marriages, and couples among Olympic ice skating pairs. It profiles eight Olympic ice skating pairs who are couples in real life and explains the required elements of pair skating, including lifts, twist lifts, throw jumps, jumps, and spins.
Expat Dating in Baku
A guide for expatriates looking to date in Baku, Azerbaijan. Topics include social life for expats, safety and comfort in areas like Downtown Baku, the visa process, getting around by mass transit, and monthly events for expatriates. The piece also references Baku hotels and places to stay.
Reformed Matchmaking and Jewish Dating
Content related to Reformed matchmaking, JRetroMatch, and Jewish matchmaking services within the context of religious observance. The article discusses Reform Judaism, the spectrum of positions on halakhic observance, and looks at how matchmaking functions within observant communities.
Age Gap Dating Advice
A discussion on age preferences in dating, referencing research guidelines and personal experiences with age-gap relationships. The piece references Psychology Today and examines whether one well-known age guideline may not work for everyone, along with personal anecdotes from readers.